Digital Equipment Prioris XL 6000 Series Installationshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installationshandbuch für Server Digital Equipment Prioris XL 6000 Series herunter. Digital Equipment Prioris XL 6000 Series 19 Seiten. With pentium pro chip upgrade
Seite druckenEnable the On-Board VGA Controller
If your system has an optional video controller, you will need to remove it and
enable the on-board VGA controller. If you are already using the on-board
controller, skip this procedure and go to "Power Down the Server."
1. Insert the SCU diskette into drive A and turn on or reset your server. The
diskette should boot automatically.
2. When the SCU title appears, press any key to continue. Afterwards,
follow the instructions on your screen to access the SCU main menu.
3. From the main menu, use the arrow keys to highlight an item and then
press Enter to select it. Press F1 at any time for help about a selection.
4. Select the Advanced Control Group and enable the
Embedded - PCI VGA controller.
5. Select Save and Exit to save this selection.
Power Down the Server
1. Turn off your server.
2. Disconnect any external devices, the ac power cord, and the monitor
power cord.
3. Unlock the security lock on the server.
4. Remove the left side panel by sliding it toward the rear of the server.
5. If present, remove any Video Option Card.
WARNING:
attempt to remove the side panel before unplugging the ac and monitor
power cords.
You might injure yourself or damage your server if you
Prioris XL 6000 Server PowerGrade
3