Bitvae S3 Gebrauchsanweisung - Seite 6
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrische Zahnbürste Bitvae S3 herunter. Bitvae S3 9 Seiten. Sonic electric toothbrush
Auch für Bitvae S3: Benutzerhandbuch (12 seiten)
Seite drucken12) Users can switch between the 5 modes by short pressing the
"Power/Mode" button.
13) Over-voltage protection
When the input voltage is too high, the toothbrush will
automatically shut down to protect itself and users.
14) Bluetooth connection in non-operational state
When the Bluetooth function is on, long press the power button
for 3 seconds for Bluetooth connection, the electronic device
and the toothbrush can be paired that way.
15) If a malfunction occurs, the 'Intensity/Charging Indicator' will
light up in red.
5. APP Function Descriptions
• Intensity adjustment:
in the toothbrush app. The adjusted range of intensity is 1-9.
• Brushing time:
'Sensitive' and 'White' modes and the toothbrush will stop
automatically after 2 minutes. The set working time for 'Tongue'
mode is 20 seconds, and the brush will stop automatically after that.
• App Interface Indicators:
the working mode and intensity will be displayed clearly and may
change according to the settings of the toothbrush.
• Real-time brushing, virtual guidance:
the brushing position can be detected by a sensor built into the
toothbrush. The detector will judge whether the user's brushing
position is correct or not, and it calculate the effective brushing
time in each mouth area. When an abnormal position is identified
(a hint appears in the app to remind users), the brushing time will
not be considered as the effective brushing time.
• Important care reminder:
sensitive area of the gum, the intensity of the toothbrush will
automatically reduce to the minimum level '1'. When an area with
plaque is found, the app will remind the user about it.
• Over pressure reminder:
pressure detector detects excessive pressure from the brush head,
an over pressure reminder menu will appear on the app.
• Data synchronization:
synchronize with the app.
• Pause during brushing process:
working for 5-15 seconds, users can short press the power button
to interrupt the working process. When the toothbrush has
worked for more than 15 seconds, the process can be interrupted
by pressing the power button briefly. In this case, the process will
restart from the remaining time within 30 seconds by pressing the
power button again.
• Data logging
The app can record 180 groups of data at most (data with
brushing time less than 15 seconds will not be recorded). If the
recorded data exceeds 180, the old data will be automatically
replaced and the new data will be automatically synced after the
Bluetooth connects with the app through pairing process.
• Data reports
If the toothbrush stops during the working process but restarts
within 30 seconds, the application will consider it as part of the
same brushing, and it will produce a unique report. If the pause
time exceeds 30 seconds, the app will consider the process as a
new brushing and will generate a new report for it.
The intensity of each mode can be adjusted
The set working time is 120 seconds for 'Clean',
In the brushing interface of the app,
When the toothbrush meets the
During the brushing process, if the over
After brushing, the brushing data will
During the brushing process,
When the toothbrush has been
5