AccuVein AV500 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medizinische Ausrüstung AccuVein AV500 herunter. AccuVein AV500 17 Seiten. A health professional's guide for use and operation
Seite drucken
Basic use and operation
Power on/off – side button
The purple button located on the left side of the AV500 will
power on the AV500 and turn on the vein display light. Press
the button again to turn the vein display light and device off.
Press the purple side button again to turn the vein display
light back on and begin locating veins again.
AV500 controls at a glance
Operate the device
Inverse setting
Left button
Projection intensity
Middle button
1 Low
2 Normal
3 Bright
Time-out setting
Time before unit automatically shuts off
Right button
10 minute time out
∞ no time out
6
The inverse setting inverts the vein projection such that the veins can be depicted by either green
light over veins or darkness over veins and green light where veins do not appear. Changing the
inverse setting may improve vein visibility and eye comfort level. Use the left button to invert the
projection.
The brightness of vein projection can be controlled using the brightness button.
The time-out setting determines the amount of time until the vein display light turns off. This
setting may help increase battery operation time of the AV500. To set the time, press the right
button to go into the time-out menu. The time out can be set to ∞ (no time-out) or 10 minutes.