Siemens Simatic ET200pro Handbuch - Seite 24
Blättern Sie online oder laden Sie pdf Handbuch für Industrielle Ausrüstung Siemens Simatic ET200pro herunter. Siemens Simatic ET200pro 29 Seiten. Migration
Auch für Siemens Simatic ET200pro: Handbuch (26 seiten), Betriebsanleitung (8 seiten), Informationen zum Produkt (2 seiten)
Diagnostics alarms
5.1 Status and error displays
Meaning of the LEDs
The following tables set out the meaning of the status and error displays.
SF LED
Table 5- 1
LEDs
SF
On
* Not relevant
LEDs Q1 to Q4
Valid for an IO-Link port that is in SIO mode.
Table 5- 2
LEDs
SF
Off
Off
LEDs IO-L 1 to IO-L 4
Valid for an IO-Link port that is in IO-Link mode and for which the port diagnostics is
enabled.
Table 5- 3
LEDs
SF
Off
On
Off
On
Off
24
Status displays of the SF LED
Meaning
Diagnostic alarm is present
No parameter assignment or incorrect parameter
assignment
Short-circuit of encoder supply 1L+
Status displays of LEDs Q1 to Q4
Meaning
Q1 to Q4
On
Input or output value is 1.
Off
Input or output value is 0 or port is disa-
bled.
Status displays of LEDs Q1 to Q4
Meaning
IO-L 1 to
IO-L 4
Flashes
Incorrect device
(green)
Flashes
No IO-Link communication (e.g. when you
(green)
have enabled the port but a functional IO-
Link device cannot be found).
On
IO-Link communication established, no
(green)
active device fault.
On (red)
IO-Link communication established, active
device or channel fault.
Incorrect device
Off
Port deactivated
Remedy
Evaluate the diagnostics.
Check the parameter assignment.
Check the wiring.
Remedy
---
---
Remedy
Check the utilized IO-Link device.
Check the wiring.
---
Check the utilized IO-Link device.
---
IO-Link Master (6ES7147-4JD00-0AB0)
Manual, 03/2018, A5E37967003-AB