Siemens SIMATIC NET Installationshandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Installationshandbuch für Industrielle Ausrüstung Siemens SIMATIC NET herunter. Siemens SIMATIC NET 40 Seiten. Network components bus terminal
Auch für Siemens SIMATIC NET: Betriebsanleitung (29 seiten), Betriebsanleitung (50 seiten), Betriebsanleitung (28 seiten), Montageanleitung Handbuch (6 seiten), Informationen zum Produkt (6 seiten), Installationshandbuch (40 seiten), Installationshandbuch (50 seiten), Referenzhandbuch (14 seiten), Installationshandbuch (34 seiten), Installationshandbuch (48 seiten), Betriebsanleitung (32 seiten)

Seite drucken
Siemens SIMATIC NET Installationshandbuch
RESET Button
TX/RX LEDs
Serial Terminal
Power Supply Terminal
Communication Ports
1.3

Required Tools and Materials

The following tools and materials are required to install the RUGGEDCOM RMC30:
AC or DC power cord (16 AWG)
CAT-5 Ethernet cables
Flathead screwdriver
Phillips screwdriver
4 x #8-32 screws
1.4

Decommissioning and Disposal

Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
RUGGEDCOM RMC30
Installation Manual, 04/2021, C79000-G8976-1008-10
Green
Off
Shuts down and restarts the device. For more information, refer to
"Resetting the Device (Page
Indicate the connection status of the serial terminal.
LED
TX
RX
The RS232/RS422/RS485 serial terminal serves a dual purpose:
•
The RS232 terminals allow for a direct interface with the device
and access to initial management functions. For information
about connecting to the device via the serial terminal, refer to
"Connecting to the Device (Page
•
The RS422/RS485 terminals allow for half or full duplex serial
connections respectively. For more information, refer to
"Communication Ports (Page
A pluggable terminal. For more information, refer to:
•
"Connecting Power (Page 9)"
•
"Power Supply Specifications (Page 21)"
Receive and transmit data. For more information about the
various ports available for the RUGGEDCOM RMC30, refer to
"Communication Ports (Page
Tools/Materials
1.3 Required Tools and Materials
State
Power is on
Power is off
14)".
State
Green
Transmitting serial data
(Blinking)
Green
Receiving serial data
(Blinking)
13)".
15)".
15)".
Purpose
For connecting power to the device.
For connecting the device to the network.
For mounting the device to a DIN rail.
For mounting the device to a panel.
For mounting the device to a panel.
Introduction
Description
Description
3