Siemens SIMATIC NET APE1404CKP Konfigurationshandbuch - Seite 20
Blättern Sie online oder laden Sie pdf Konfigurationshandbuch für Industrielle Ausrüstung Siemens SIMATIC NET APE1404CKP herunter. Siemens SIMATIC NET APE1404CKP 36 Seiten. Application processing engine
Seite drucken
Configuring and Using the RUGGEDCOM APE
The following sections describe how to configure and use the RUGGEDCOM APE:
NOTICE
Before using the RUGGEDCOM APE, create a backup image that can be restored
should the module be configured improperly.
Warranty does not support modules rendered inoperable/inaccessible due to config-
uration errors made by the user.
2.1
Logging in to RUGGEDCOM APE
Use the following default username and password to log in to the RUGGEDCOM APE:
NOTICE
Security hazard – risk of unauthorized access
To prevent unauthorized access to the device, make sure to change the default pass-
word before commissioning the device.
Windows® Embedded Standard
7
Linux
Linux + CROSSBOW ADM
Check Point GAiA™
2.2
Using the RUGGEDCOM APE as a Firewall
The RUGGEDCOM APE can be used as a firewall, as an external network interface, or
as a one-armed firewall.
As an external network interface, the unprotected network is attached to the
RUGGEDCOM APE external Ethernet port and a firewall application, such as Shore-
wall or Check Point GAiA, is used. The RUGGEDCOM APE firewall acts as the primary
router and forwards traffic to the RX15xx device. This scenario is ideal when Layer 2
device hardware is used.
RUGGEDCOM APE (Application Processing Engine)
Configuration Manual, 12/2019, C79000-G8976-1121-05
Software Platform
Default Username
There is no default username or password for Windows® Embedded
Standard 7 installations. The username and password is set by the
user during the first boot.
root
admin
admin
Default Password
admin
admin
admin
2
11