Siemens SIMATIC NET RUGGEDCOM i801 Installationshandbuch - Seite 32
Blättern Sie online oder laden Sie pdf Installationshandbuch für Industrielle Ausrüstung Siemens SIMATIC NET RUGGEDCOM i801 herunter. Siemens SIMATIC NET RUGGEDCOM i801 36 Seiten. Rugged ethernet switches
Auch für Siemens SIMATIC NET RUGGEDCOM i801: Installationshandbuch (38 seiten)
Seite drucken
Chapter 6
Certification
• CAN/CSA-C22.2 No. 14-05
Industrial Control Equipment
• CAN/CSA-C22.2 No. 142-M1987
Process Control Equipment Industrial Products
• CAN/CSA-C22.2 No. 213-M1987
Non-Incendive Electrical Equipment for Use in Class I, Division 2 Hazardous Locations
• UL 60950-1
Information Technology Equipment – Safety Part 1: General Requirements
• ANSI/UL 508
Standard for Industrial Control Equipment
• UL 916 4th Edition 2007
Standard for Energy Management Equipment
• ANSI/ISA-12.12.01-2007
Non-incendive Electrical Equipment For Use In Class 1 And 2, Division 2 And Class 3, Divisions 1 And 2
Hazardous (classified) Locations
The device is marked with a CSA symbol that indicates compliance with both Canadian and U.S. requirements.
Copies of the CSA Declarations of Conformity are available via Siemens Industry Online Support:
•
https://support.industry.siemens.com/cs/ww/en/view/109476357
•
https://support.industry.siemens.com/cs/ww/en/view/109476358
Section 6.1.2
ATEX/IEC Ex
This device meets the requirements of the following ATEX/IEC Ex standards:
• IEC/EN 60079-15:2005
Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Construction, Test and Marking of Type of
Protection "N" Electrical Apparatus
It is specifically approved for use in hazardous locations defined as:
• EEx nC IIC T4
• Ex II 3 G
• 12-24 VDC, 2A, Class III
Section 6.1.3
European Union (EU)
This device is declared by Siemens Canada Ltd to comply with essential requirements and other relevant provisions
of the following EU directives:
24
C
US
(General Safety)
(Hazardous Locations)
RUGGEDCOM i801
Installation Guide
ATEX/IEC Ex