Siemens SIMATIC RTLS Betriebsanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Industrielle Ausrüstung Siemens SIMATIC RTLS herunter. Siemens SIMATIC RTLS 30 Seiten. Localization systems
Auch für Siemens SIMATIC RTLS: Betriebsanleitung (21 seiten), Gerätehandbuch (14 seiten), Betriebsanleitung (20 seiten), Betriebsanleitung (21 seiten)

Seite drucken

Installation and operation

3.1

Notes on installation

Note

Before you install the transponders, read this section carefully to ensure problem-free

installation and commissioning.

The transponders can only be used in conjunction with the RTLS localization system. You

can obtain the radio address of the RTLS5201T via the data matrix code printed on the

transponder or via the identifier "Addr".

You can secure the transponder with two M3 screws (torque 0.8 to 1.0 Nm) or with cable

ties (maximum width 3.5 mm) in the four side lugs. Alternatively, you can also attach the

transponder with an adhesive pad. When using an adhesive pad for fastening, ensure that

the opening on the back (1 mm hole) is not closed and thereby allows pressure equalization.

Install the transponder in such a way that it has a direct line-of-sight connection to the

gateways (360° panorama view). Any type of material can impact wireless localization.

Wireless localization through metal is not possible. In this case, localization via wireless

reflections can occur, which results in inaccurate determination of the location. You can find

additional information on this in the "Reflections and interference" section.

Check the transponder for damage before installation. The specified operating temperature

ranges must be observed.

The transponder is powered by a lithium battery (not included in the scope of delivery).

Fires and burns

Improper handling of batteries can lead result in fires and burns.

The enclosure of the transponder must not be squashed, punctured or exposed to other

mechanical influences. It may only be opened to change batteries.

Never expose the transponder to fire, temperatures above 65 °C or permanent direct sunlight.

Inserting or replacing batteries

The transponder batteries can only be replaced in dry environments. Make sure that the battery

is inserted with the poles in the correct direction.

SIMATIC RTLS5201T

Operating Instructions, 08/2023, C79000-G8976-C687-02

CAUTION