Siemens Simatic S7-400 Handbuch - Seite 17
Blättern Sie online oder laden Sie pdf Handbuch für Industrielle Ausrüstung Siemens Simatic S7-400 herunter. Siemens Simatic S7-400 35 Seiten. Block library motor starter sirius for simatic pcs 7 sirius motor starter pcs 7 library v7.1+sp2 / sirius motor starter pcs 7 library v8 migration 8.0+sp1
Auch für Siemens Simatic S7-400: Handbuch (18 seiten), Erste Schritte (36 seiten)
Seite drucken
Micro Automation Set 14
5
Live Demo
5.1
Preliminary remark
For the startup, we offer you software examples with test code and test
parameters as download. The software examples support you during the
first steps and tests with your Micro Automation Sets. They enable quick
testing of hardware and software interfaces between the products
described in the Micro Automation Sets.
The software examples are always assigned to the components used in the
set and show their basic interaction. However, they are not real applications
in the sense of technological problem solving with definable properties.
5.2
Download of the startup code
In Micro Automation Set 14, the startup code is designed in such a way that
one "Basis" station communicates with one "Backup" station. S7-200,
S7-300, S7-400 or WinAC station can be selected as "Backup" station.
Optionally an "HMI" station can be additionally connected. For this option,
the startup code is modularly subdivided.
The software examples are available on the HTML page from which you
downloaded this document.
The download consists of several ZIP files which can be extracted with any
unzip program. Following ZIP files are available:
Table 5-1
Set14_S7-200-200_V2-
0_en.zip
Set14_S7-200-300_V2-
0_en.zip
Set14_S7-200-400_V2-
0_en.zip
Set14_S7-200-WinAC_V2-
0_en.zip
Set14_S7-200_V2-0.zip
Set14_S7-300_V2-0_en.zip
Set14_S7-400_V2-0_en.zip
Set14_WinAC_V2-0_en.zip
Set14_WinCCflexible_V2-
0_en.zip
V2.0
Entry ID 21062588
File name
Configuration for S7-200 "Basis" for
communication with S7-200 "Backup"
Configuration for S7-200 "Basis" for
communication with S7-300 "Backup"
Configuration for S7-200 "Basis" for
communication with S7-400 "Backup"
Configuration for S7-200 "Basis" for
communication with WinAC "Backup"
Configuration for S7-200 "Backup"
Configuration for S7-300 "Backup"
Configuration for S7-400 "Backup"
Configuration for WinAC "Backup"
Project file for the WinCC flexible "HMI" station for
monitoring the "Backup" stations.
05/18/05
Live Demo
Content
17/35