Siemens SINAMICS S120 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Industrielle Ausrüstung Siemens SINAMICS S120 herunter. Siemens SINAMICS S120 22 Seiten. Applications for cabinet modules, liquid-cooled
Auch für Siemens SINAMICS S120: Betriebshandbuch (20 seiten), Erste Schritte (32 seiten), Handbuch (41 seiten), Kurzbeschreibung (22 seiten), Handbuch (43 seiten), Anleitung für den Einbau in Schränke für Schiffsantriebsanwendungen (28 seiten), Anwendungshandbuch (34 seiten), Anwendungshandbuch (46 seiten), Erste Schritte (32 seiten), Betriebsanleitung (21 seiten), Technisches Handbuch (30 seiten), Handbuch für die Inbetriebnahme (20 seiten)

Safety notes

1.1

Electric shock and danger to life due to other energy sources

Touching live components can result in death or serious injury.

• Only work on electrical equipment if you are appropriately qualified.

• Always observe the country-specific safety rules for all work.

Generally, the following steps apply when establishing safety:

1. Prepare for disconnection. Notify all those who will be affected by the procedure.

2. Isolate the drive system from the power supply and take measures to prevent it being

3. Wait until the discharge time specified on the warning labels has elapsed.

4. Check that there is no voltage between any of the power connections, and between any of

5. Check that every auxiliary circuit is de-energized.

6. Ensure that the motors cannot move.

7. Identify all other dangerous energy sources, e.g. compressed air, hydraulic systems or

8. Check that the correct drive system is completely locked.

After you have completed the work, restore the operational readiness by following the

above steps in the reverse order.

Electric shock if there is no ground connection

For missing or incorrectly implemented protective conductor connection for devices with

protection class I, high voltages can be present at open, exposed parts, which when

touched, can result in death or severe injury.

• Ground the device in compliance with the applicable regulations.

Option L34 parameterizing the circuit breaker on the output side

Operating Instructions, 03/2021, A5E02914106A

WARNING

switched back on again.

the power connections and the protective conductor connection.

water. Switch the energy sources to a safe state.

WARNING