Siemens SIREMOBIL Iso-C SP Installations- und Einstellanweisungen Handbuch - Seite 9
Blättern Sie online oder laden Sie pdf Installations- und Einstellanweisungen Handbuch für Industrielle Ausrüstung Siemens SIREMOBIL Iso-C SP herunter. Siemens SIREMOBIL Iso-C SP 16 Seiten.
Seite drucken
Area dose product measurement device
Installation
•
Disconnect the SIREMOBIL power plug.
•
Remove the SIREPHOS cover.
Without the laser targeting device:
•
Attach the area dose product measurement device to the SIREPHOS using the screws
included in the packaging.
•
Connect the interface cable already integrated in the cable harness to the area dose
product measurement device and lock it in place.
•
Refit the SIREPHOS cover hood and seal the joints with silicone sealing compound.
With the laser targeting device:
•
Remove the laser targeting device from the SIREPHOS by removing the screws.
•
Mount the area dose product measurement device to the SIREPHOS.
•
Reattach the laser targeting device.
•
Connect the interface cable already integrated in the cable harness to the area dose
product measurement device and lock it in place.
•
Check the laser targeting device according to the adjustment instructions and, if
necessary, adjust it.
•
Refit the SIREPHOS cover hood and seal the joints with silicone sealing compound.
Siemens AG
Medical Engineering
SPR2-230.033.04
Rev. 03
06.05
Page 9 of 16
SIREMOBIL Iso-C
CS PS 24
9
1
1
1