Digital Everywhere FloppyDTV Montageanleitung

Blättern Sie online oder laden Sie pdf Montageanleitung für Empfänger Digital Everywhere FloppyDTV herunter. Digital Everywhere FloppyDTV 4 Seiten.

General description

This guide describes how to install your FloppyDTV either in PCI slot or in a 3,5" Floppy bay of your

computer.

Please follow the instructions described below very carefully to avoid damages to your

computer or your FloppyDTV!

Before assembling the FloppyDTV turn your computer off!!!

"FireWire", is sometime also called "IEEE1394" or "iLink".

1. How to connect the FireWire cable of the FloppyDTV

There are three possibilities to connect the FireWire cable depending on the FireWire controller

located in your computer.

1.1 FireWire controller on PCI or PCI-e card with internal connectors

•

Locate the internal FireWire connectors and plug the

FireWire cable (see Picture)

1.2 FireWire connectors on back side of the PC

•

Locate an unused PCI-Slot in the computer and replace the PCI-

Bracket with the one supplied with the FloppyDTV. Pull the FireWire

cable trough the cut-out in the PCI bracket.

•

Connect it to a free FireWire connector (sometimes marked with

IEEE1394)

070928-v2.1

FloppyDTV

Assembly guide

Page 1