Siemens syngo MR E11 Benutzerhandbuch - Seite 21

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Industrielle Ausrüstung Siemens syngo MR E11 herunter. Siemens syngo MR E11 40 Seiten. Mr system
Auch für Siemens syngo MR E11: Benutzerhandbuch (19 seiten)

Seite drucken
Siemens syngo MR E11 Benutzerhandbuch
MAGNETOM Family, Biograph mMR | syngo MR D11, syngo MR D13, syngo MR B19, syngo MR B20P,
syngo MR E11
Print No. MR-06020G.640.08.04.02
4

Configuration

Before the first usage you need to configure the active driver.
Therefore a web interface is available at the active driver. This web
interface can be addressed via Internet browser from any laptop, but
not from the syngo Acquisition Workplace.
Prior to starting the configuration, ensure that the following
prerequisites are fulfilled:
✓
Disc with IPSetup.exe (delivered together with the MR
Elastography option) is available.
✓
A crossover Ethernet cable is available.
 CAUTION
Use of an unshielded Ethernet cable!
Device may exceed Class A emissions limits
◆
To reduce emissions below Class A limits, use a shielded
Ethernet cable (not provided) to connect the active driver
with the laptop. The Ethernet cable supplied by
Resoundant is not shielded.
1
Connect the crossover Ethernet cable to the Network Interface
Card (NIC) on the laptop and to the active driver.
2
Ensure that the firewall of the laptop is deactivated for the
configuration.
3
On the laptop, insert the disc (of the Resoundant delivery) into
the disc drive, navigate to the disc and run the IPSetup.exe.
The IPSetup screen will appear. The active driver ID is displayed in
the Select a Unit area.
Configuration
4
21