Siemens ULTRAMAT 6F Betriebsanleitung - Seite 37
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Industrielle Ausrüstung Siemens ULTRAMAT 6F herunter. Siemens ULTRAMAT 6F 49 Seiten. Gas analyzer for the determination of ir-absorbing gases
Auch für Siemens ULTRAMAT 6F: Handbuch Zusatzausrüstung (20 seiten), Sicherheitshandbuch (24 seiten)
Seite drucken
7
Technical specifications
7.1
General technical specifications (all analyzers)
These specifications are valid unless otherwise defined in the technical specifications for the analyzer version.
Enclosure
Operating position of the analyzer
Degree of protection
Dimensions
Electrical characteristics
EMC interference immunity
(with safety extra-low voltage (SELV) with
safe isolation)
Electrical safety
Power supply
Climatic conditions
Permissible ambient temperature
During operation
•
During transportation and storage
•
Permissible ambient humidity
Permissible ambient pressure
Note
Since measuring ranges can be changed, the specifications regarding accuracy relate to the measuring ranges specified on
the label!
The data for the technical specifications is based on IEC 61207.
Compact Operating Instructions in accordance with EN 61010-1 and EN 60079-0
A5E45779389002-01, 09/2018
Front panel vertical
IP65 according to EN 60529
438 mm x 480 mm x 311 mm (W x D x H)
In accordance with standard requirements of NAMUR NE21 or EN 61236
In accordance with EN 61010-1,
overvoltage category II (heated devices) or
overvoltage category III (non-heated devices)
100 to 120 V AC (nominal range of use 90 V to 132 V), 48 to 63 Hz or
200 to 240 V AC (nominal range of use 180 V to 264 V), 48 to 63 Hz
+5 to +45 °C (41 to 113 °F)
-30 to +70 °C (-22 to 158 °F)
< 90% RH (relative humidity) average annual value, during transporta-
tion and storage,
no falling below dew point
700 to 1200 hPa absolute
37