Siemens ULTRAMAT 6F Sicherheitshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Sicherheitshandbuch für Industrielle Ausrüstung Siemens ULTRAMAT 6F herunter. Siemens ULTRAMAT 6F 24 Seiten. Gas analyzer for the determination of ir-absorbing gases
Auch für Siemens ULTRAMAT 6F: Handbuch Zusatzausrüstung (20 seiten), Betriebsanleitung (49 seiten)

Seite drucken

Siemens AG

Safety Guidelines

This manual contains notices you have to observe in order to ensure your personal safety, as well

as to prevent damage to property. The notices referring to your personal safety are highlighted in

the manual by a safety alert symbol, notices referring only to property damage have no safety alert

symbol. These notices shown below are graded according to the degree of danger.

Danger

indicates that death or severe personal injury will result if proper precautions are not taken.

Warning

indicates that death or severe personal injury may result if proper precautions are not taken.

Caution

with a safety alert symbol, indicates that minor personal injury can result if proper precautions are not taken.

Caution

without a safety alert symbol, indicates that property damage can result if proper precautions are not taken.

Notice

indicates that an unintended result or situation can occur if the corresponding information is not taken into

account.

If more than one degree of danger is present, the warning notice representing the highest degree of

danger will be used. A notice warning of injury to persons with a safety alert symbol may also in-

clude a warning relating to property damage.

Qualified Personnel

The device/system may only be set up and used in conjunction with this documentation. Commis-

sioning and operation of a device/system may only be performed by qualified personnel. Within the

context of the safety notes in this documentation qualified persons are defined as persons who are

authorized to commission, ground and label devices, systems and circuits in accordance with es-

tablished safety practices and standards.

Prescribed Usage

Note the following:

Warning

This device may only be used for the applications described in the catalog or the technical description and

only in connection with devices or components from other manufacturers which have been approved or

recommended by Siemens. Correct, reliable operation of the product requires proper transport, storage,

positioning and assembly as well as careful operation and maintenance.

Trademarks

All names identified by ® are registered trademarks of the Siemens AG. The remaining trademarks

in this publication may be trademarks whose use by third parties for their own purposes could vio-

late the rights of the owner.

Disclaimer of liability

While we have verified the contents of this manual for agreement with the hardware and software

described, variations remain possible. Thus we cannot guarantee full agreement. The contents of

this manual are regularly reviewed and corrections are included in subsequent editions. We wel-

come all suggestions for improvement.

Subject to change without further notice

SIL Safety Manual ULTRAMAT 6 Gas analyzers

A5E00729183-02

2 of 19