Cisco 6800 Series Hardware-Installation - Seite 18

Blättern Sie online oder laden Sie pdf Hardware-Installation für IP-Telefon Cisco 6800 Series herunter. Cisco 6800 Series 20 Seiten. Ip phone, multiplatform phones
Auch für Cisco 6800 Series: Schnellstart-Handbuch (3 seiten), Benutzerhandbuch (8 seiten), Wartungshandbuch (8 seiten), Benutzerhandbuch (14 seiten), Handbuch zur Fehlersuche (12 seiten), Schnellstart-Handbuch (4 seiten), Benutzerhandbuch (22 seiten), Schnellstart-Handbuch (4 seiten), Installationshandbuch (39 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten)

Install the Battery in the Handset

The battery contacts are on the top left edge of the battery and the top left edge of the battery compartment.

Ensure that the contacts meet and that the battery is seated in the compartment.

Note

Step 5

Replace the battery cover, make sure that the cover is closed, and turn the latch clockwise to the locked

position.

Don't force the cover closed. If it doesn't close easily, take it off and check that the battery is completely seated

in the battery compartment.

What to do next

Before you use the handset, you need to charge it. See

Hardware Installation

The battery fits only one way in the compartment. Don't force the battery in the wrong way in the

battery compartment.

Charge the Handset Battery, on page

Hardware Installation

19.