Digital Guard Dawg Watch Dawg-X2 Funktionen und Bedienungsanleitungen - Seite 2
Blättern Sie online oder laden Sie pdf Funktionen und Bedienungsanleitungen für Sicherheitssystem Digital Guard Dawg Watch Dawg-X2 herunter. Digital Guard Dawg Watch Dawg-X2 6 Seiten.
Seite druckenArming the alarm
Stop the vehicle, remove the key and press the LOCK (picture of lock symbol) button on the transmitter.
The horn will beep and the turn signals will flash indicating the system has been armed. The transmitter
will return a beep, while the lock (lock picture) and horn (horn picture) icons on the display of the
remote are illuminated to confirm the system has been armed. After 5 seconds, the motion sensor will
become active and any motion will trigger the alarm (The sensitivity of the motion sensor can be
adjusted on the side of the unit). When the alarm is trigger the remote will vibrate and light up
indicating the alarm has been trigged. When the Alarm is triggered the bike will flash the turn signals
and cause the horn to sound for 30 seconds.
Arming the Alarm in Mute Mode
Stop the vehicle, remove the key and press the LOCK button (picture of lock) twice within 5 seconds, The
turn signals will flash, the horn will not sound and the system will arm in mute mode. The transmitter
will return a beep, while the lock icon (lock icon) and the horn icon will have a small line through it (horn
with an X) on the display of the transmitter are illuminated. In the mute alarm mode, the bikes horn will
not sound if the alarm is triggered
Disarming the Alarm
When the system is armed press the Unlock (picture of unlock) button once this will disarm the alarm.
The turn signals will flash twice and horn will make two beeps indicating the alarm has been disarmed.
The remote will return two beeps while the Unlock icon (unlock icon) on the display of the remote is
illuminated.
Remote Starting your Bike