Cisco 6961 - Unified IP Phone Standard VoIP Handbuch für die Verwaltung - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für die Verwaltung für IP-Telefon Cisco 6961 - Unified IP Phone Standard VoIP herunter. Cisco 6961 - Unified IP Phone Standard VoIP 19 Seiten. Unified communications manager express
Auch für Cisco 6961 - Unified IP Phone Standard VoIP: Datenblatt (5 seiten), Anmerkungen zur Veröffentlichung (18 seiten), Datenblatt (5 seiten), Benutzerhandbuch (38 seiten), Handbuch für die Verwaltung (14 seiten), Setup-Handbuch (16 seiten), Eigenschaften (29 seiten), Referenzhandbuch (4 seiten), Handbuch zur Verwendung (6 seiten), Schnellreferenzkarte (2 seiten), Kurzreferenz-Handbuch (2 seiten)

Seite drucken

Cisco 6961 - Unified IP Phone Standard VoIP Handbuch für die Verwaltung

Set PC Port Configuration Field

Procedure

Step 1

Unlock network setup options.

Step 2

Scroll to the PC Port Setup option and then press Edit.

Step 3

Scroll to the setting that you want and then press Select.

Step 4

To configure the setting on multiple phones simultaneously, enable the PC Port Remote Configuration in the

Enterprise Phone Configuration (System > Enterprise Phone Configuration).

Note

IPv4 Setup Menu Options

The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select the

IPv4 option on the Network Setup menu.

The following table describes the IPv4 Setup menu options.

For information about the keys you can use to edit options, see the

Table 2: IPv4 Setup Menu Options

Option

DHCP

IP Address

Subnet Mask

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications

Manager 10.0 (SCCP and SIP)

If the ports are configured for PC Port Remote Configuration in Unified Communications Manager,

the data cannot be changed on the phone.

Description

Indicates whether the phone has DHCP

enabled or disabled.

When DHCP is enabled, the DHCP server

assigns the phone an IP address. When

DHCP is disabled, the administrator must

manually assign an IP address to the phone.

For more information, see

on page

Internet Protocol (IP) address of the phone.

If you assign an IP address with this option,

you must also assign a subnet mask and

default router. See the Subnet Mask and

Default Router options in this table.

Subnet mask used by the phone.

Edit Values, on page

DHCP Usage,

12.

Cisco Unified IP Phone Settings

To Change

Set DHCP Field, on page 9

Set IP Address Field, on page

Set Subnet Mask Field, on page