Epson 7700p - PowerLite XGA LCD Projector Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Projektor Epson 7700p - PowerLite XGA LCD Projector herunter. Epson 7700p - PowerLite XGA LCD Projector 12 Seiten. Product support bulletin(s)
Auch für Epson 7700p - PowerLite XGA LCD Projector: Spezifikationen (2 seiten), Handbuch Kommunikation (20 seiten), Benutzerhandbuch (1 seiten), Technischer Brief (7 seiten), Benutzerhandbuch (10 seiten), Produkt-Support-Bulletin (1 seiten)

Epson 7700p - PowerLite XGA LCD Projector Benutzerhandbuch
Mode
Refresh Rate (Hz)
MACL13
66.62
MAC II 13
66.67
MAC16
74.55
MAC19—60
59.28
MAC19
74.93
MAC21
75.062
HDTV480P (ANSI/
59.94
SMPTE)
HDTV480P
59.94
(ATSC)
HDTV480I (ANSI/
59.94
SMPTE)
HDTV480I
59.94
(ATSC)
HDTV720P
59.94
(SMPTE)
HDTV1080P (ANSI/
59.94
SMPTE)
HDTV480I (ANSI/
59.94
SMPTE)
NTSC (SVGA)
60
NTSC (XGA)
60
PAL (SVGA)
50
PAL (XGA)
50
SECAM (SVGA)
50
SECAM (XGA)
50
*
The image is resized so that it displays using one of the projector's
native formats.
Computer Video Port Pin Assignments
The Computer 1 analog port and the Monitor Out port are
female video RGB, 15-pin micro-D-style connectors. Here are
their pin assignments:
Pin #
Computer 1 port
1
Red video
2
Green video
3
Blue video
4
Monitor (ID bit 2)
5
GND
6
Red video GND
7
Green video GND
8
Blue video GND
9
+5V
Resolution
640
480
640
480
832
624
1024
768
1024
768
1152
870*
720
483
704
480
720
487
704
480
1280
720
1920
1080
1920
1080
800
438
1024
438
800
512
1024
512
800
512
1024
512
Monitor Out port
Red out / red video
Green out / green video
Blue out / blue video
Reserved
GND
GND
GND
GND
Reserved
11/00
EPSON PowerLite 7700p Projector
Pin #
Computer 1 port
10
Synchronous GND
11
Monitor (ID bit 0)
12
SDA
13
Horizontal sync
14
Vertical sync
15
Reserved

Positioning the Projector

Follow these guidelines to get the best results when projecting:
Place the projector on a sturdy, level surface, between
3.6 and 48 feet from the screen.
Make sure there is plenty of space for ventilation around and
under the projector.
Make sure the projector is within 10 feet of a grounded
electrical outlet or extension cord and within 5 feet of the
image source.
Face the projector squarely toward the screen. Otherwise,
your image won't be square.
Note: It's easier to position the projector when the screen is
directly in front of the room. If the screen is placed diagonally in a
corner, it's much more difficult to aim the projector squarely at
the screen and get a non-distorted image.
If you place the projector below the level of the screen, you'll
have to tilt it up by extending the feet as shown. Tilting the
projector upward causes the image to lose its square shape, but
you can correct the distortion by pressing the
button as described on page 6.
EPSON PowerLite 7700p Projector - 3
Monitor Out port
GND
Reserved
Reserved
Horizontal sync
Vertical sync
Vertical sync
Keystone
ideal
height