Epson 7900p - PowerLite XGA LCD Projector Informationen zum Produkt - Seite 18

Blättern Sie online oder laden Sie pdf Informationen zum Produkt für Projektor Epson 7900p - PowerLite XGA LCD Projector herunter. Epson 7900p - PowerLite XGA LCD Projector 24 Seiten. Supplemental / late breaking information
Auch für Epson 7900p - PowerLite XGA LCD Projector: Benutzerhandbuch (42 seiten), Betriebshandbuch (36 seiten), Ersatzteile (1 seiten), Schnelles Einrichten (2 seiten), Benutzerhandbuch (1 seiten), Technischer Brief (7 seiten), Produkt-Support-Bulletin (7 seiten), Lens Installation (5 seiten)

Seite drucken

Epson 7900p - PowerLite XGA LCD Projector Informationen zum Produkt

Epson PowerLite 7900p Projector

Using EMP NetworkManager

You can use EMP NetworkManager to configure the projector

to send out messages by e-mail, notifying you when a problem

occurs with the projector. Before running EMP

NetworkManager, make sure you've installed the software as

described in the User's Guide. Then follow the steps below to

create e-mail settings for each projector you want to monitor.

Selecting the Projectors to Monitor

1. To start EMP NetworkManager, click

Programs

All Programs > EPSON Projector >

EMP NetworkManager

You see the EMP NetworkManager screen. The projectors

you've registered through EMP Monitor appear as icons.

2. If you'd like to register a projector manually and you know

its IP address, double-click the

icon.

selection

You see this screen:

3. Enter the projector's IP address and click

projector's icon is added to the EMP NetworkManager

screen.

Epson PowerLite 7900p Projector

Start >

Proj(ector) address

. The

Add

Setting a Password

You can set a password to restrict access to each projector from

EMP NetworkManager:

1. Right-click the icon of the projector whose password you

want to set, then select

2. Enter a password up to 14 characters in length.

Creating the E-Mail Settings

1. If EMP NetworkManager is not already running, open it

from the Start menu. You see your registered projectors:

2. Double-click the icon for the projector whose e-mail

settings you want to create. Enter your password, if you

created one.

3. EMP NetworkManager connects to the projector, and you

see this screen:

Note: The projector must be plugged in (projecting or in

standby mode) for you to be able to connect to it.

To access a projector in standby mode, you must first select

as the

Network ON

projector's Advanced1 menu. (See the User's Guide for

instructions.)

9/04

Change Password

setting in the

Standby Mode