Siemens CM636GB 1 Series Benutzerhandbuch und Installationsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Backofen Siemens CM636GB 1 Series herunter. Siemens CM636GB 1 Series 40 Seiten.

Seite drucken
en Before using for the first time
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
7  Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7.1 Carrying out the initial configuration
When the appliance is connected to the electricity sup-
ply for the first time or following a lengthy power cut,
you must configure the settings before you can use it. It
may take a few seconds for the settings to appear on
the display.
Setting the language
1.
Use the rotary selector to select the required lan-
guage.
2.
Press ​ ⁠ .
a The next setting appears.
Setting the time
1.
Turn the rotary selector to set the current time.
2.
Press ​ ⁠ .
a The next setting appears.
Setting the date
1.
Use the rotary selector to set the current day.
2.
Press ​ ⁠ .
3.
Use the rotary selector to set the current month.
4.
Press ​ ⁠ .
5.
Use the rotary selector to set the current year.
6.
Press ​ ⁠ .
a A notification appears on the display confirming that
the initial configuration is complete.
8  Basic operation
8.1 Switching on the appliance
▶
Press
​ ⁠ to switch the appliance on.
The
​ ⁠ button lights up blue.
‒
a The Siemens logo appears in the display. A type of
heating and a temperature are then displayed.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
▶
Press
​ ⁠ to switch the appliance off.
The light above the
‒
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears in the
display.
12
​ ⁠ button goes out.
7.2 Cleaning the appliance before using it
for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
1.
Remove the product information and the accessor-
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
2.
Wipe the smooth surfaces in the cooking compart-
ment with a soft, damp cloth.
3.
Press
​ ⁠ to switch the appliance on.
4.
Apply the following settings:
Type of heating
Temperature
Cooking time
→ "Basic operation", Page 12
5.
Press
​ ⁠ to start the operation.
Ventilate the kitchen while the appliance is heat-
‒
ing.
6.
When the cooking time has elapsed, press
switch the appliance off.
7.
Once the appliance has cooled down, clean the
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
8.
Clean the accessories thoroughly using a detergent
solution and a dish cloth or soft brush.
8.3 Starting operation
You must start each cooking operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
▶
Do not use the appliance if there is water on the
cooking compartment floor.
▶
Wipe away any water on the cooking compartment
floor before operation.
▶
Press
​ ⁠ to start the operation.
a The settings, the run time and the heat-up line ap-
pear on the display.
8.4 Pausing or cancelling operation
You can briefly pause the operation and then continue.
If you cancel the operation completely, the settings are
reset.
1.
To pause the operation briefly:
Briefly press
‒
4D hot air
​ ⁠
Maximum
1 hour
​ ⁠ .
​ ⁠ to