Siemens CM656GB 1B Benutzerhandbuch und Installationsanleitung - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Backofen Siemens CM656GB 1B herunter. Siemens CM656GB 1B 44 Seiten.

Siemens CM656GB 1B Benutzerhandbuch und Installationsanleitung
7  Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7.1 Carrying out the initial configuration
When the appliance is connected to the electricity sup-
ply for the first time or following a lengthy power cut,
you must configure the settings before you can use it. It
may take a few seconds for the settings to appear on
the display.
Setting the language
Use the rotary selector to select the required lan-
1.
guage.
Press ⁠ .
2.
a The next setting appears.
Setting the time
Turn the rotary selector to set the current time.
1.
Press ⁠ .
2.
a The next setting appears.
Setting the date
Use the rotary selector to set the current day.
1.
Press ⁠ .
2.
Use the rotary selector to set the current month.
3.
Press ⁠ .
4.
Use the rotary selector to set the current year.
5.
Press ⁠ .
6.
a A notification appears on the display confirming that
the initial configuration is complete.
8  Basic operation
8.1 Switching on the appliance
Press
to switch the appliance on.
The
button lights up blue.
a The Siemens logo appears in the display. A type of
heating and a temperature are then displayed.
8.2 Switching off the appliance
Switch your appliance off when you are not using it.
The appliance will switch itself off automatically if it is
not used for a certain period of time.
Press
to switch the appliance off.
The light above the
a The appliance switches off. Any functions currently
in progress are cancelled.
a The time or residual heat indicator appears in the
display.
8.3 Starting operation
You must start each cooking operation.
ATTENTION!
If there is water on the cooking compartment floor
when operating the appliance at temperatures above
120 °C, this will damage the enamel.
Do not use the appliance if there is water on the
cooking compartment floor.
button goes out.
Before using for the first time en
7.2 Cleaning the appliance before using it
for the first time
Before using the appliance to cook food for the first
time, you must clean the cooking compartment and ac-
cessories.
Remove the product information and the accessor-
1.
ies from the cooking compartment. Remove any
leftover packaging, such as polystyrene pellets, and
any adhesive tape either in or on the appliance.
Wipe the smooth surfaces in the cooking compart-
2.
ment with a soft, damp cloth.
Press
to switch the appliance on.
3.
Apply the following settings:
4.
Type of heating
Temperature
Cooking time
→ "Basic operation", Page 13
Press
to start the operation.
5.
Ventilate the kitchen while the appliance is heat-
ing.
When the cooking time has elapsed, press
6.
switch the appliance off.
Once the appliance has cooled down, clean the
7.
smooth surfaces in the cooking compartment with a
detergent solution and a dish cloth.
Clean the accessories thoroughly using a detergent
8.
solution and a dish cloth or soft brush.
Wipe away any water on the cooking compartment
floor before operation.
Press
to start the operation.
a The settings, the run time and the heat-up line ap-
pear on the display.
8.4 Pausing or cancelling operation
You can briefly pause the operation and then continue.
If you cancel the operation completely, the settings are
reset.
To pause the operation briefly:
1.
Briefly press
To continue the operation, press
To cancel the operation, press
2.
a The operation stops and all of the settings are reset.
8.5 Setting an operating mode
Requirement: The appliance must be switched on.
Press
⁠ .
1.
The operating modes menu opens.
Press the operating mode that you require.
2.
Various options are available depending on the op-
erating mode.
The selection can be changed using the rotary se-
3.
lector.
4D hot air
Maximum
1 hour
⁠ .
⁠ .
⁠ .
to
13