Siemens CM736G1.1B Benutzerhandbuch und Installationsanleitung - Seite 22

Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Backofen Siemens CM736G1.1B herunter. Siemens CM736G1.1B 44 Seiten.

Seite drucken

en Home Connect

17.1 Setting up Home Connect

Requirements

¡ The appliance is connected to the power supply and

is switched on.

¡ You have a mobile device with a current version of

the iOS or Android operating system, e.g. a smart-

phone.

¡ The mobile device and the appliance are within

range of your home network's Wi-Fi signal.

Download the Home Connect app.

17.2 Home Connect Settings

You can adjust the settings and network settings for Home Connect by going to your appliance's basic settings.

Which settings the display shows will depend on whether Home Connect has been set up and whether the appliance

is connected to your home network.

Basic setting

Connectivity status

Home Connect as-

sistant

Wi-Fi

Remote start

Software update

Possible settings

Start the assistant

Disconnect the network

Off

Deactivated

Manual

Permanent

Open the Home Connect app and scan the follow-

ing QR code.

Follow the instructions in the Home Connect app.

Explanation

The connectivity status shows the current status of the connec-

tion to Home Connect.

You can connect your appliance to the Home Connect app via

the Home Connect assistant.

Note: If you are using the Home Connect assistant for the first

time, only the "Start assistant" setting is available.

You can use the Wi-Fi to switch off the network connection for

your appliance. When you have connected successfully once,

you can deactivate the Wi-Fi and not lose your detailed data.

As soon as you activate Wi-Fi again, the appliance connects

automatically.

Note: In networked standby mode, the appliance requires a

maximum of 2 W.

When remote start is deactivated, you can only view the oper-

ating status of the appliance in the app.

For manual remote start, you must activate the remote start

each time before you can start the appliance via the app. If

you open the appliance door within 15 minutes of activating

remote start or of the operation ending, remote start is deactiv-

ated.

For permanent remote start, you can start and operate the ap-

pliance remotely at any time. If you often operate the appliance

remotely, it is helpful to set the remote start to "Permanent".