Siemens HB-37 Series Benutzerhandbuch und Installationsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Backofen Siemens HB-37 Series herunter. Siemens HB-37 Series 32 Seiten.

Siemens HB-37 Series Benutzerhandbuch und Installationsanleitung
en Basic settings
12  Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display
Basic setting
Time display
Signal duration upon completion of a cook-
ing time or timer period
⁠ ⁠
Button tone when pressing a button
Cooling fan run-on time
Waiting time until a setting is applied
⁠ ⁠
Childproof lock can be adjusted
Water hardness
1
Factory setting (may vary according to model)
2
Only for appliance types with steam function
12.2 Changing basic settings
Requirement: The appliance is switched off.
1.
Press and hold the
four seconds.
a The first basic setting appears in the display,
e.g.  ⁠ ⁠   ⁠ .
Use the
or
 button to change the setting.
2.
Use the
 button to switch to the next basic setting.
3.
13  Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
13.1 Cleaning products
In order to avoid damaging the various oven surfaces
on the appliance, do not use unsuitable cleaning
products.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
clean the appliance.
14
2
 button for approximately
Selection
= hide the time
1
= display the time
= 10 seconds
1
= 30 seconds
= 2 minutes
= off
1
= on
= short
= medium
1
= long
= extra long
1
= 3 seconds
= 6 seconds
= 10 seconds
= no
1
= yes
= softened
= soft (up to 1.5 mmol/l)
= medium (1.5–2.5 mmol/l)
= hard (2.5–3.8 mmol/l)
= very hard (above 3.8 mmol/l)
To save the changes, press and hold the
4.
for approx. four seconds.
Note: Following a power failure, the factory basic set-
tings are restored.
12.3 Discarding changes to the basic
settings
Turn the function selector.
a All changes are discarded and not saved.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive cleaning products.
Do not use cleaning products with a high alcohol
content.
Do not use hard scouring pads or cleaning
sponges.
Do not use any special cleaners for cleaning the ap-
pliance while it is hot.
1
 button