Siemens HB-37 Series Benutzerhandbuch und Installationsanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Backofen Siemens HB-37 Series herunter. Siemens HB-37 Series 32 Seiten.
Seite drucken
Symbol
Function
Oven light
Programme
4.4 Temperature and setting levels
There are different settings for the types of heating and functions.
Note: For temperature settings above 250 °C, the appliance reduces the temperature to approx. 240 °C after ap-
prox. 10 minutes. If your appliance has the top/bottom heating or bottom heating types, this temperature reduction
does not take place there.
Symbol
Function
Zero setting
50–275
Temperature range
1, 2, 3
Grill settings
or
I, II, III
Programme
Heat-up indicator
The appliance indicates when it is heating up.
When the appliance is heating, the symbol lights up
on the display. This symbol goes out when heating is
paused.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
when the symbol first goes out.
Note: Due to thermal inertia, the temperature displayed
may differ slightly from the actual temperature inside
the cooking compartment.
4.5 Cooking compartment
The functions in the cooking compartment make your
appliance easier to use.
Shelf supports
The shelf supports in the cooking compartment enable
you to place accessories at different heights.
→ "Accessories", Page 8
Your appliance has five shelf positions. The shelf posi-
tions are numbered from bottom to top.
You can remove the shelf supports, e. g. for cleaning.
→ "Shelf supports", Page 17
Use
Illuminate the cooking compartment without heating.
→ "Lighting", Page 7
Use programmed setting values for various types of food.
→ "Programme", Page 12
Use
The appliance is not heating up.
Set the temperature in the cooking compartment in °C.
Set the grill settings for Full-surface grill and Grill, small area (depending on
the appliance model).
1 = low
2 = medium
3 = high
Set the programme function.
Familiarising yourself with your appliance en
Self-cleaning surfaces
The back wall in the cooking compartment is self-clean-
ing. The self-cleaning surfaces are coated with a por-
ous, matt ceramic layer and have a rough surface.
When the appliance is in operation, the self-cleaning
surfaces absorb splashes from roasting or grilling and
break them down.
If the self-cleaning surfaces no longer clean themselves
adequately during operation, heat up the cooking com-
partment specifically to the right temperature.
→ "Cleaning self-cleaning surfaces in the cooking com-
partment", Page 16
Lighting
The oven lamp lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. When the function selector
is turned to bring operation to an end, the lighting goes
out.
The Oven light setting on the function selector can be
used to switch on the light without heating.
Note: The cooling fan also runs at position Oven light.
Cooling fan
The cooling fan switches on automatically during oper-
ation. The hot air escapes above the door.
ATTENTION!
Do not cover the ventilation slot above the appliance
door. The appliance overheats.
Ensure that the ventilation slots are unobstructed.
▶
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Appliance door
If you open the appliance door during operation, the
operation continues.
7