Siemens iSlide HB30S51UC Installationshandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Installationshandbuch für Backofen Siemens iSlide HB30S51UC herunter. Siemens iSlide HB30S51UC 40 Seiten. Siemens oven user manual
Auch für Siemens iSlide HB30S51UC: Spezifikationen (1 seiten), Handbuch für Gebrauch und Pflege (48 seiten)

Seite drucken
Siemens iSlide HB30S51UC Installationshandbuch

Installation

Electrical Installation

Electrical Connection
English 6
All model ovens on the front cover are dual rated, designed to be connected to
either 208/240V AC, 60 Hz, 4 wire, single-phase power supply.
Model
HB30S51UC
HB30D51UC
The electrical supply should be a 4-wire single-phase AC. Install a suitable conduit
box (not furnished).
Important: Local Codes may vary, installation, electrical connections and
grounding must comply with all applicable local codes.
If local codes permit grounding through the electrical supply neutral, connect both
the white neutral wire and the bare ground wire from the oven to the white neutral
electrical supply wire.
The four-wire connection is preferred, but where local codes permit, the three wire
connection is also acceptable.
Four-wire Connection
•
Connect the red oven wire to the red electrical supply wire (hot wire).
•
Connect the black oven wire to the black electrical supply wire (hot wire).
•
Connect the white neutral oven wire to the white neutral (not bare ground)
electrical supply wire.
•
Connect the bare ground oven wire to the bare ground electrical supply wire.
Circuit Required
208V, 60 Hz
30 AMP
40 or 50 Amp circuit. Refer to local electrical codes
for de-rating requirements.
240V, 60 Hz
30 AMP