Siemens WM..U... Gebrauchsanweisung und Installationshandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung und Installationshandbuch für Waschmaschine Siemens WM..U... herunter. Siemens WM..U... 40 Seiten.

Seite drucken

Notes

To remove the laundry at the end of

■

the programme,deactivate the

childlock.

The childlock remains active, even

■

once the appliance has been

switched off.

If the appliance is switched off while

■

the programme is running and

childlock is activated, the

programme continues when the

appliance is switched back on.

Adding/removing laundry

After starting the programme, you can

add or remove laundry if necessary.

Touch the I button. The appliance

checks whether reloading is possible.

If the following appears on the Touch-

Display:

The symbol Œ disappears, reloading

■

is possible.

The symbol Œ lights up, reloading is

■

not possible.

To continue the programme, touch the

I button. The programme continues

automatically.

Notes

Do not leave the door open for too

■

long when adding laundry as water

from the laundry may leak out.

For safety reasons, the door remains

■

locked when the water level or

temperature is high, or while the

drum is turning, and it is not possible

to add laundry during this time.

Changing the programme

If you have started the wrong

programme by mistake, you can

change the programme as follows:

Touch the I button.

Select another programme.

And touch the I button again. The

new programme starts from the

beginning.

Operating the appliance

Cancel the programme

For programmes at high temperatures:

Touch the I button.

To cool down laundry: Select

q Rinse/Spin 0.

And touch the I button again.

For programmes at low temperatures:

Touch the I button.

Select q Rinse/Spin 0.

And touch the I button again.

Programme end during rinse

hold

The I button flashes on the Touch-

Display, and the preset spin speed and

remaining programme length are

displayed for the selected programme.

Continue the programme by:

Touch the I button or

■

Change the spin speed (if

■

necessary) and then touch the I

button again.

If the water only needs to be

Note:

drained, touch the I button approx.

1 minute after the programme starts,

before the spin cycle begins. Then

switch the appliance off. The

programme is interrupted and the

door lock is released. The laundry

can be removed.

Programme end

End lights up on the Touch-Display and

I and Œ diaplays are off.