Siemens XQG80-WM10P1601W Gebrauchsanweisung und Installationsanleitung - Seite 22
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung und Installationsanleitung für Waschmaschine Siemens XQG80-WM10P1601W herunter. Siemens XQG80-WM10P1601W 40 Seiten.
Auch für Siemens XQG80-WM10P1601W: Gebrauchsanweisung und Installationsanleitung (34 seiten)
Seite drucken
Cleaning and maintenance
en
2
Cleaning and
maintenance
:
Warning
C l e a n i n g a n d m a i n t e n a n c e
Risk of death!
There is a risk of electric shock if touch
live components.
Switch off the appliance and pull out the
mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
Machine housing/Control
panel
Immediately remove washing and
■
cleaning agent residue.
Wipe with a soft, damp cloth.
■
Do not use abrasive cloths, sponges
■
or detergents (stainless steel
cleaner).
Do not clean the appliance with a
■
water jet.
Drum
Use chlorine-free cleaning agent, not
steel wool.
22
Descaling
Not required if detergent dosed
correctly. However, if this does occur,
follow the instructions of the descaling
agent manufacturer.
Cleaning the detergent
dispenser
If it contains detergent or fabric softener
residue:
Pull out, depress insert, take out
1.
drawer all the way.
Take out insert: using your finger,
2.
press insert upwards.
Clean detergent dispenser and
3.
insert with water and a brush and
dry.
Attach insert and lock into position
4.
(push cylinder onto guide pin).
Insert detergent drawer.
5.
Leave detergent drawer open so
Note:
that residual water can evaporate.
Cleaning the measuring aid A
for liquid detergent
If it contains liquid detergent residue:
Hold the mearsuring aid, pull the
1.
cover upward and disconnect them.
*
depending on the model
*