Cisco 7940G Handbuch für die Verwaltung - Seite 14

Blättern Sie online oder laden Sie pdf Handbuch für die Verwaltung für IP-Telefon Cisco 7940G herunter. Cisco 7940G 29 Seiten. Ios telephony services ip phone
Auch für Cisco 7940G: Benutzerhandbuch (21 seiten), Benutzerhandbuch (25 seiten), Datenblatt (7 seiten), Handbuch (35 seiten), Kurzreferenz (2 seiten), Benutzerhandbuch (15 seiten), Kurzreferenz-Handbuch (2 seiten), Benutzerhandbuch (20 seiten), Telefon-Handbuch (17 seiten), Handbuch für Administratoren (15 seiten), Benutzerhandbuch (16 seiten), Referenzhandbuch (24 seiten), Handbuch (21 seiten), Installationshandbuch (12 seiten), Benutzerhandbuch (10 seiten)

Seite drucken

Configuring the SIP Parameters Manually

See the

Select Settings > Network Configuration.

Step 2

The Network Configuration menu appears.

To restore all parameters to their defaults, select Erase Config > Yes.

Step 3

Note

Select Save.

Step 4

The phone programs the new information into flash memory and resets.

Configuring Network Parameters Manually

If you are not using DHCP to configure your network parameters, you must manually configure them.

Prerequisites

For a complete list of the SIP parameters that you can configure, see

Parameters."

To manually configure your phone's network parameters, follow these steps:

Procedure

Press the Settings key.

Step 1

The Settings menu is displayed.

Highlight Network Configuration.

Step 2

Press the Select softkey.

Step 3

The Network Configuration menu is displayed.

Step 4

Highlight DHCP Enabled.

Step 5

Press the No softkey.

DHCP is now disabled.

Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)

3-14

"Unlocking the Phone" section on page

If DHCP is disabled on a phone, restoring default phone settings reenables DHCP.

Connect your phone as described inthe

Unlock configuration mode as described in the

default, the network parameters are locked to ensure that end users cannot modify settings that might

affect their network connectivity.

Review the guidelines on using the Cisco SIP IP phone menus.

If configuring a domain name:

Press the Number softkey to enter a numerical ID or press the Alpha softkey to enter a name.

If entering letters, use the numbers on the dial pad associated with a particular letter. For

example, the 2 key has the letters A, B, and C. For a lowercase a, press the 2 key once. To scroll

through the available letters and numbers, press the key repeatedly.

Press the << softkey to delete any mistakes.

Chapter 3

3-10.

"Installing the Phone on the Wall" section on page

"Unlocking the Phone" section on page

Appendix D, "SIP IP Phone

Initializing Cisco Unified IP Phones

2-1.

3-10. By

OL-7890-01