Siemens SITRANS L Series Betriebsanleitung - Seite 24
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Schalter Siemens SITRANS L Series herunter. Siemens SITRANS L Series 44 Seiten. Capacitance transmitters
Auch für Siemens SITRANS L Series: Kompakt-Bedienungsanleitung (45 seiten), Betriebsanleitung (33 seiten), Betriebsanleitung (50 seiten)
Seite drucken
Setup
6.1
Indication of the switching status
The switching status of the electronics can be checked via the 360° status indication
(LEDs) integrated in the upper part of the housing.
The colours of the 360° status indication have the following meaning: (Default
setting)
•
•
•
•
•
6.2
Function table
The following table provides an overview of the switching conditions depending on
the set mode and the level (factory setting).
Coverage
Covered
Uncovered
SITRANS LCS050
Operating Instructions, 02/2021,
A5E50859888
Green lights up - power supply connected, transmitter output high-impedance
Green flashing - Maintenance required
Yellow lights up - power supply connected, transmitter output low impedance
Red lights - shortcircuit or overload in the load circuit (transmitter output high-
impedance)
Red flashing - Error at transmitter or electronics (transmitter output high
impedance) or device is in simulation
Switching status
Output 1
open
closed
a
Switching status
Output 2
closed
open
b
c
Control lamp
Green
Yellow
6
17