Siemens iQ500 SX Series Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler Siemens iQ500 SX Series herunter. Siemens iQ500 SX Series 36 Seiten.

Seite drucken

aus

Rinse aid

Overview of menu

The settings can be found in the

individual chapters.

Intensive drying :

Rinse aid :

Automatic disconnection :

Rinse aid

a i d

R i n s e

As soon as the rinse-aid refill

indicator @ is lit on the fascia, there

is still a rinse-aid reserve of 1-2 rinsing

processes. Refill with rinse aid.

The rinse aid is required for stain-free

utensils and clear glasses. Use only

rinse aid for domestic dishwashers.

Combined detergents with rinse-aid

component may be used up to a water

hardness of 21° dH (37° fH,

26° Clarke, 3.7 mmol/l) only. If

the water hardness is over 21° dH,

rinse aid must be used.

1. Open the dispenser 1j by pressing

and lifting the plate on the cover.

- :

2. Carefully pour rinse aid up

to the max. mark in the filler opening.

3. Close cover until it clicks shut.

4. To prevent excessive foam formation

during the next rinse cycle, remove

any rinse aid which has run over with

a cloth.

Setting amount of rinse aid

The amount of rinse aid can be set from

to :

. Please set rinse aid on

to obtain very good drying results

( :

is already set in factory).

Change this setting, only if streaks

(select lower setting) or water stains

(select higher setting) are left on the

utensils.

1. Close the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button ` until

: .... is indicated on the digital

display.

4. Release both buttons.

5. Press programme button # until

the factory set value :

indicated on the digital display )".

PD[