Siemens SE25E259EU/39 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler Siemens SE25E259EU/39 herunter. Siemens SE25E259EU/39 28 Seiten.

Seite drucken

Water softening system

To ensure good washing results, the

dishwasher requires soft water, i.e.

containing low amounts of lime, otherwise

white limescale will be deposited on the

utensils and inner container.

Tap water above 9° Clarke (from set value

) must be softened. The water is

softened with salt (regeneration salt) in the

water softening system of the dishwasher.

The setting and therefore the required

amount of salt depends on the degree of

hardness of your tap water (see table).

Setting

The amount of salt dispensed can be

set in 4 stages

depending on the hardness of your water.

Accordingly 0, 1, 2 or 3 displays are lit

(see table).

– Find out about the hardness

value of your tap water. Your water

utility company will help you with this.

– Setting can be found in the water

hardness table.

– Close the door.

Water hardness table

:DWHU

+DUGQHVV

KDUGQHVV

UDQJH

YDOXH G+

VRIW

PHGLXP

KDUG

PPROO

6HWWLQJ

– Rotate the programme selector 8

from the 12 o'clock position anti-

clockwise by one notch.

– Switch on main switch ( and hold

down for at least 3 sec.

The salt refill indicator h flashes

and the lamps above the symbols 6

and , light up. (Hardness value has

been set to 2 at the factory.)

To change the setting:

– Rotate programme selector 8.

You can select a set value between 0

and 3 according

to the hardness of your water.

If the lamps 6, , and "End" light up,

the maximum set hardness value has

been reached. If the programme

selector is turned further, the lights go

out and the set hardness value is set to

level 0.

– Switch off the main switch (.

The chosen setting has now been

stored.

(QG