Siemens SN Series Betriebsanleitung - Seite 25

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler Siemens SN Series herunter. Siemens SN Series 44 Seiten. Dishwasher
Auch für Siemens SN Series: Betriebsanweisungen (38 seiten), Betriebsanleitung (38 seiten), Betriebsanleitung (42 seiten), Betriebsanleitung (42 seiten), Betriebsanleitung (44 seiten), Betriebsanleitung (46 seiten), Betriebsanleitung (44 seiten), Betriebsanleitung (42 seiten), Gebrauchsanweisung (48 seiten), Betriebsanleitung (40 seiten), Betriebsanleitung (42 seiten), Betriebsanleitung (40 seiten)

Seite drucken

Automatic switch off after end

of programme or interior light*

* depending on model

To save energy, the dishwasher can be

automatically switched off 1 min or 120

min after the programme ends.

The setting can be selected from :

to :

Appliance does not

switch off automatically.

The interior light 1"

comes on when the door

is opened irrespective of whether

the ON/OFF switch (

is switched on or off. When

the door is closed the light is off. If

the door is open for longer than 60

min., the light switches off

automatically. The interior light 1"

is lit only when the set value :

is selected.

Appliance switches off after 1 min.

Appliance switches off after 120

min.

1. Open the door.

2. Switch on ON/OFF switch (.

3. Hold down programme button #

and press START button `

until : ... is indicated on the digital

display.

4. Release both buttons.

The LED for button # flashes

and the digital display h displays

the factory setting :

5. Keep pressing programme

button # until the value : ... is

indicated on the numerical display

A u t o m a t i c s w i t c h o f f / i n t e r i o r l i g h t

Operating the appliance

To change the setting:

1. Press programme button 3.

Each time the button is pressed,

the set value increases by one level;

when the value of :

reached, the display jumps back

to :

2. Press START button `.

The set value is saved.

3. Close the door.

Switching off the appliance

Short time after the end of the

programme:

1. Open the door.

2. Switch off ON/OFF switch (.

3. Turn off the tap (not applicable if

Aqua-Stop fitted).

4. Remove the utensils when they have

cooled down.

Note

When the programme ends, leave

the appliance to cool down a while

before opening it. This will prevent

steam from escaping and causing long-

term damage to your built-in furniture.

has been