Siemens SN23E831TI Betriebsanleitung - Seite 37

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler Siemens SN23E831TI herunter. Siemens SN23E831TI 40 Seiten.

Seite drucken

Drinking water connection

1. Fasten the drinking water connection

to the tap according

to the installation instructions using

the enclosed parts.

Ensure that the drinking water

connection is not kinked, crushed

or twisted.

2. When replacing the appliance,

always use a new water supply hose.

Water pressure:

At least 0.05 MPa (0.5 bar), maximum

1 MPa (10 bar). At a higher water

pressure: connect pressure-reducing

valve ahead.

Inlet rate:

Minimum 10 litres/minute

Water temperature:

Note printing on the water inlet hose!

If models are marked with 25°,

the water temperature may be max.

25 °C (cold water).

For all other models:

Cold water preferred; hot water max.

temperature 60 °C.

Installation and connection

Electrical connection

Connect the appliance to an

alternating current only, ranging from

220 V to 240 V and 50 Hz or 60 Hz

via a correctly installed socket with

protective earth conductor. See

rating plate for required fusing 92.

The socket must be near

the appliance and freely accessible

following installation.

If the plug is not freely accessible, an

allpole disconnector with a contact

opening of at least 3 mm must be

fitted on the installation side

to satisfy the relevant safety

instructions.

The connection may be modified by

technicians only.

A power cord extension may be

purchased from customer service

only.

Use only a residual current operated

circuit-breaker which features

the symbol ‚. Only this extension

guarantees compliance with

the currently valid regulations.

The appliance features a water

damage protection system. Please

note the system will not function

unless the power supply

is connected.