Siemens SX Series Betriebsanleitung - Seite 28

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler Siemens SX Series herunter. Siemens SX Series 42 Seiten. Dishwasher
Auch für Siemens SX Series: Betriebsanweisungen (38 seiten), Betriebsanleitung (38 seiten), Betriebsanleitung (42 seiten), Betriebsanleitung (44 seiten), Betriebsanleitung (46 seiten), Betriebsanleitung (44 seiten), Betriebsanleitung (42 seiten), Gebrauchsanweisung (48 seiten), Betriebsanleitung (40 seiten), Betriebsanleitung (42 seiten), Betriebsanleitung (44 seiten), Betriebsanleitung (40 seiten)

Seite drucken
Siemens SX Series Betriebsanleitung
en
Fault, what to do?

Fault table

Fault
"Check water supply"
display 8 lights up.
Error code :
is lit.
Error code :
is lit.
is lit.
is lit.
Error code :
is lit.
Error code :
is lit.
28
Cause
Supply hose kinked.
Tap turned off.
Tap jammed or calcified.
Filter in the water supply blocked. Switch off the appliance and pull out
Filters 1Z are soiled or
are soiled or
are soiled or
blocked.
Waste water hose
Waste water hose
Waste water hose
is blocked or kinked.
is blocked or kinked.
is blocked or kinked.
Siphon connection still sealed.
Siphon connection still sealed.
Siphon connection still sealed.
Cover on the waste water pump
Cover on the waste water pump
Cover on the waste water pump
loose.
Waste water pump blocked
or cover on the waste water
pump is not locked in position.
Mains voltage too low.
Remedial action
Install supply hose without kinks.
Turn on the tap.
Turn on the tap.
Flow rate must be min. 10 l/min.
when water supply is open.
the mains plug. Turn off the tap. Unscrew
water connection.
Clean filter in the supply hose. Screw water
Clean filter in the supply hose. Screw water
Clean filter in the supply hose. Screw water
connection on again. Check for leaks.
Reconnect power supply. Switch on
the appliance.
Clean filters.
(See Cleaning and maintenance)
Install hose without kinks, remove any
residue.
Check connection to siphon and open if
Check connection to siphon and open if
Check connection to siphon and open if
required.
Lock cover correctly.
(See Waste water pump)
Clean pump and lock cover correctly. (See
Waste water pump)
Not an appliance fault, have the mains
voltage and electrical installation checked.