Siemens SX76M091GB/22 Betriebsanleitung - Seite 32

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler Siemens SX76M091GB/22 herunter. Siemens SX76M091GB/22 44 Seiten.

Seite drucken

Fault, what to do?

Fault

Error code ":ƒ† is lit.

Error code ":ƒˆ is lit.

A different error code is

indicated on the digital

display.

(":‹‚ to ":„‹)

Display flashes.

Refill indicator for salt @

and/or rinse-aid H is lit.

Refill indicator for salt @

and/or rinse-aid H is not

lit.

Water is left in the

appliance at the end of the

programme.

Cause

Waste water pump blocked or

cover on the waste water pump is

not locked in position.

Mains voltage too low.

A technical fault has probably

occurred.

Door not closed properly.

No rinse aid.

No salt.

Sensor does not detect salt

tablets.

Refill indicator switched off.

There is still enough special salt/

rinse aid available.

Filter system or area under the

filters 1Z is blocked.

Program has not ended yet.

Remedial action

Clean pump and lock cover correctly. (See

"Waste water pump")

Not an appliance fault, have the mains

voltage and electrical installation checked.

Switch off appliances with the ON/OFF

switch (. After a short time restart the

appliance.

If the problem recurs, turn off the tap and

pull out the mains plug.

Call customer service and mention the error

code.

Close the door. Ensure that no objects

(utensil, fragrance dispenser) are protruding

over the basket and preventing the door

from closing.

Refill rinse aid.

Refill with special salt.

Use different special salt.

Activation/deactivation (see chapter Water

softening system/Special salt or Rinse aid).

Check refill indicator, levels.

Clean filters and area underneath (see

"Waste water pump").

Wait until programme ends or reset (see

"Terminating the programme").