Siemens ED FQ1 Series Gebrauchsanweisung - Seite 10
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kochfeld Siemens ED FQ1 Series herunter. Siemens ED FQ1 Series 36 Seiten. Induction hob with integrated ventilation system
Auch für Siemens ED FQ1 Series: Gebrauchsanweisung Handbuch (24 seiten)
Seite drucken
Getting to know your appliance
en
The control panel
Selection sensors
Main switch
#
Selecting the cooking zone
»
0 IIIIIIIIIIII
Settings area
PowerBoost function
&
Intensive ventilation settings
CombiZone function
ü
Move function
ÿ
Locking the control panel for cleaning
Ñ
Childproof lock
'
Time-setting options
0
Manual hood control
I
Touch controls
Touching a symbol activates the associated function.
Notes
Always keep the control panel clean and dry.
■
Moisture reduces its effectiveness.
Do not place any cookware near the indicators or
■
sensors. The electronics could overheat.
The hotplates
Cooking zones
Single cooking zone
"
Combined cooking zone
¯
Only use cookware that is suitable for induction cooking; see the section entitled ~ "Induction cooking"
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
Display
: High temperature
•
■
Display
: Low temperature
œ
■
10
Use cookware that is a suitable size
See the section entitled ~ "CombiZone function" or ~ "Move function"
Display
Operating status
‹
Power levels
‚
-
Š
Time-setting options
‹‹
Residual heat
•
/
œ
PowerBoost function
›
Intensive ventilation setting I
Intensive ventilation setting II
›
.
CombiZone function
ü
Move function
ÿ
Cooking timer
x
Timer
V
Time indicator
ö
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for as
long as the hotplate is still warm.