Siemens EH6..MN1.. series Gebrauchsanweisung - Seite 9
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kochfeld Siemens EH6..MN1.. series herunter. Siemens EH6..MN1.. series 16 Seiten.
Flexible zone
This may be used as one complete hotplate or two individual
hotplates depending on the actual cooking needs.
Operation.
It consists of several independently controlled inductors. When
the zone is working, those inductors that are not covered by
cookware are automatically turned off.
Advice on using cookware
To ensure that the cookware is detected and heat is distributed
evenly, correctly centre the cookware:
in the upper or lower part of the flexible zone, when the
■
cookware is smaller than 13 cm (see diagram)
or in one of the two halves of the flexible zone, when the
■
cookware is larger than 13 cm (see diagram).
! FP
When using cookware of a different size or made of a different
material, noise and vibrations that do not affect the correct
working of the zone may occur.
Childproof lock
The hob can be protected against being accidentally turned on,
to ensure that children do not switch on the hotplates.
Activating and deactivating the childproof
lock.
The range must be turned off.
To activate: press and hold the
4 seconds. The
symbol lights up for 10 seconds. The
@
range is locked.
Powerboost function
The Powerboost function can be used to heat large amounts of
water more quickly than the power level
Restrictions when using
This function may be used for all hotplates, provided that the
other hotplate in the same group is not turned on. (See figure)
Otherwise, the
and
symbols will flash on the display of the
›
Š
selected hotplate; then the power level
without the function being activated.
FP
symbol for approx.
#
Š
.
Š
is automatically set
Consisting of two independent zones
The flexible zone can be used normally as two independent
hotplates.
How to activate
See "adjusting the hotplate" section.
As one hotplate
To use the entire hotplate with all individual zones.
How to activate
The hob must be switched on.
Place the cookware and press the
1.
lights up. The flexible hotplate has been activated. Then slide
your finger over the programming panel until the required
power level is displayed.
To change the power level: Select the flexible hotplate by
2.
pressing the symbol
þ
and changing the power level with the
programming panel
To add more cookware
Press the symbol
so that the cookware is detected.
þ
To deactivate
Set to 0 on the programming panel.
To use as two separate hotplates once again
Press either of the symbols
that form part of the flexible hotplate. The flexible hotplate is
turned off and operates once again as two separate hotplates.
To deactivate: press and hold the
4 seconds. The lock is now deactivated.
Activating and deactivating the childproof
lock
With this function, the childproof lock automatically activates
when a hob is switched off.
Activating and deactivating
See the "Basic Settings" section.
*URXS
*URXS
symbol. The
þ
Nþ
or
on one of the two hotplates
ü
ý
symbol for approx.
#
*URXS
*URXS
indicator
9