Cisco 7945G - Unified IP Phone VoIP Benutzerhandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für IP-Telefon Cisco 7945G - Unified IP Phone VoIP herunter. Cisco 7945G - Unified IP Phone VoIP 23 Seiten. Unified ip phone
Auch für Cisco 7945G - Unified IP Phone VoIP: Vorbereiten der Installation (17 seiten), Benutzerhandbuch (4 seiten), Installationshandbuch (19 seiten), Kurzanleitung (12 seiten), Kurzanleitung (15 seiten), Verwaltungshandbuch (6 seiten), Handbuch (9 seiten), Kurzreferenz-Handbuch (3 seiten), Fehlersuche und Wartung (25 seiten), Benutzerhandbuch (42 seiten)

2. Select My Phone Apps and scroll down to Personal Speed Dial.

3. Select Personal Speed Dial

4. Add a Label and Number

5. Go back to My Phone Apps and press Reset Phone. You Personal Speed-Dial number will appear on the phone display

screen.

Switching an In-Progress Call to Another Phone Using SNR

The Single Number Reach (SNR) feature allows you to switch an in-progress call on your desktop phone to your remote

destination phone, such as a mobile phone. You can pick up an in-progress call on the desktop phone or remote destination

phone without losing the call. All unanswered calls are forwarded to your voice mail.

Your system administrator must configure this feature for your IP Phone. Contact your system administrator for more

Note

information.

Switch an in-progress Call from Your Desktop Phone to Your Remote Destination Phone

To switch an in-progress call on your desktop phone to your remote destination phone:

1. Press the Mobility soft key.

2. Select Send Call to Mobile Phone.

3. Answer the in-progress call on your remote destination phone.

The desktop phone line button turns red and handset icons and the calling party number appear on the phone display. You

cannot use same phone line for any other calls, but if your desk phone supports multiple lines, you can use another line to make

or receive calls.

Switch an in-progress Call from a Remote Destination Phone to Your Desktop Phone

1. Press Resume on your desk phone and start talking on your desk phone.

2. Hang up the call on your remote phone to disconnect the phone.

Change Your Remote Destination Phone Number

You can replace the existing remote destination phone number with a new phone number.

To change the existing remote destination phone number:

1. Press Services button and select My Phone Apps.

2. Select Single Number Reach.

3. Use << soft key to type your new remote destination phone number. Make sure you add the appropriate dialing prefix or

access code (if applicable) to your remote destination number.

4. Press Submit.

Enable or Disable Single Number Reach

You can enable or disable Single Number Reach (SNR) on your phone by using the Mobility soft key.

• To disable SNR, press Mobility soft key and select Disable Mobile Connect.

• To enable SNR, press Mobility soft key and select Mobile Connect On.