ACD MiniBump Gebrauchsanweisung - Seite 15

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Prüfgeräte ACD MiniBump herunter. ACD MiniBump 20 Seiten. Calibration gas bump tester

physical switch mounted on the circuit board. If the membrane area gets

damaged, it is replaced as part of the entire front label. If the switch

becomes nonfunctional, it must be repaired or replaced as part of the

circuit board.

Caution

Both the electrochemical source and the alkaline batteries used in the

MiniBump instrument contain corrosive chemicals.While it is not

expected that the chemicals in the source or alkaline batteries will leak

during normal operation, it is recommended that both the source and the

batteries be removed from the instrument if it is being stored for periods

longer than one week between use.

Note: The generating sources contain very small amounts of

acidic solution and should be disposed of as per local or federal

regulations. For more information, please contact the factory.