Epson BrightLink 685Wi Start Here Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Start Here Handbuch für Projektor Epson BrightLink 685Wi herunter. Epson BrightLink 685Wi 6 Seiten.
Auch für Epson BrightLink 685Wi: Setup-Handbuch (43 seiten)
Seite drucken3
Interacting With the
Screen
Interactive Pens
Your projector came with 2 pens, one orange (Interactive
Pen A) and one blue (Interactive Pen B).
The pens have
a soft, felt tip. Make sure one
rechargeable AA battery is installed in each pen.
Pen tip
(unscrew to replace)
Battery
light
• To turn on the pen, pick it up. The blue light comes on
briefly. If the battery is low, the light flashes.
• Hold the pen perpendicular to the board, as shown
below.
• When you are finished using the pen, simply place it in
an area away from the projection screen.
Note: The pens turn off automatically after about
15 seconds of inactivity. Pick the pen up to turn it
back on.
Battery cover
Button
Using Your Pen as a Mouse
When you are in computer interactive mode, you can
use the pen as a mouse to interact with your computer
desktop.
Mouse function
Pen action
Left-click
Tap on board
Double-click
Tap twice
Right-click
Press pen button
Move cursor
Hover over board
Click and drag
Tap and hold on item, then drag
See the online BrightLink User's Guide for more
information.
Having Trouble?
If the cursor does not match your pen location, follow the
calibration instructions in this packet.
Additional Information
v Pens are the property of the classroom, DO NOT
REMOVE, they are paired with that specific
projector.
v Do NOT use the projection surface with standard
white board markers, the residue left behind after
erasing may interfere with the calibration of the
projector.
v There are recharging stations for the pen batteries
in every classroom, DO NOT REMOVE.