Siemens iQ700 ER9A SD7 Series Benutzerhandbuch und Installationsanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Installationsanleitung für Kochfeld Siemens iQ700 ER9A SD7 Series herunter. Siemens iQ700 ER9A SD7 Series 20 Seiten.
Auch für Siemens iQ700 ER9A SD7 Series: Gebrauchsanweisung (16 seiten), Informationen zur Verwendung (17 seiten), Benutzer-, Installations- und Wartungsanweisungen (20 seiten)
en Installation instructions
▶ Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
▶ If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box and
turn off the gas supply.
▶ Call customer services. → Page 19
An ingress of moisture can cause an electric
shock.
▶ Do not use steam- or high-pressure clean-
ers to clean the appliance.
The insulation on cables of electrical appli-
ances may melt if it touches hot parts of the
appliance.
▶ Never bring electrical appliance cables into
contact with hot parts of the appliance.
WARNING ‒ Risk of injury!
Faults or damage to the appliance and re-
pairs that have not been carried out correctly
are dangerous.
▶ Never switch on the appliance if there is a
fault with it.
▶ If the appliance is faulty, unplug the mains
plug or switch off the fuse in the fuse box.
Shut off the gas supply and call the after
sales service.
▶ Always have repairs carried out to the ap-
pliance and damaged gas lines replaced
by trained, specialist personnel.
Cracks or fractures in the glass surface are
dangerous.
▶ All of the burners and each electrical heat-
ing element switch off immediately and dis-
2 Installation instructions
Observe this information when installing the appliance.
2.2 Preparing to install
These built-in cooktops are intended to be inserted in a worktop cutout.
¡ Make a cut-out in the worktop with the required di-
mensions.
6
connect the appliance from the power sup-
ply.
▶ Shut off the gas supply.
▶ Do not touch the surface of the appliance
▶ Do not use the appliance.
▶ Call the customer service.
Cookware that is not the right size, or that is
damaged or incorrectly positioned may cause
serious injuries.
▶ See the notes on cookware.
When switching on the burner, sparks are
generated in the ignition plugs.
▶ Never touch the ignition plugs while the
burner is being lit.
If a control knob is too stiff to turn or it is
loose, it must no longer be used.
▶ Contact our after-sales service immediately
to have the control knob repaired or re-
placed.
An appliance with a cracked or broken sur-
face can cause cuts.
▶ Do not use the appliance if it has a cracked
or broken surface.
WARNING ‒ Risk of suffocation!
Children may put packaging material over
their heads or wrap themselves up in it and
suffocate.
▶ Keep packaging material away from chil-
dren.
▶ Do not let children play with packaging ma-
terial.
Children may breathe in or swallow small
parts, causing them to suffocate.
▶ Keep small parts away from children.
▶ Do not let children play with small parts.
2.1 Statutory requirements
This installation must conform with the following:
¡ Manufacturer's Installation instructions
¡ Local Gas Fitting Regulations
¡ Municipal Building Codes
¡ Refer to AS/NZS 5601.1 for Gas Installations
¡ S.A.A. Wiring Code
¡ Local Electrical Regulations
¡ Any other statutory regulations