Digital Juice FOLLOW FOCUS PRO Handbuch "Erste Schritte

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Kamera-Zubehör Digital Juice FOLLOW FOCUS PRO herunter. Digital Juice FOLLOW FOCUS PRO 2 Seiten.

Seite drucken

Using the Follow Focus PRO

Mounting the Follow Focus PRO to your Camera Rig:

Before attaching the Follow Focus PRO unit to your rig, you should first mount

your lens gear belt around the focus wheel on your lens. To do so, loosen the

thumbscrew on the lens gear belt

the clasp. Next, slide the belt around the focus wheel on your lens (7), pull it

snug and then tighten the thumbscrew.

Once the lens gear belt is attached, you can mount the Follow Focus PRO to

your rig. To do this, loosen the black knob

will loosen the clamps, allowing you to snap the focus assembly onto your

camera rig (8). Your goal is to mount the unit on the rails so that the drive

gear meets the teeth of the lens gear belt. To finetune the distance of the focus

wheel and drive gear from the lens, loosen the black knob on the bottom of the

rail mount (9). When you have properly mated the teeth on the drive gear and

the lens belt, tighten the black knob on the bottom of the rail mount to lock the

unit in place (10). Do not press the gears together

too tightly as you could cause damage to your

equipment or to the follow focus unit.

(6)

until the teeth of the gear slide through

(4)

opposite the focus wheel which

Getting Started Guide

The

Digital Juice Follow Focus PRO

is an essential accessory for any

professional DSLR camera setup,

allowing for quick and accurate

focusing with minimal lens shake. It

mounts to industry standard 15mm

rails and is compatible with a wide

variety of lenses, cameras, and

shoulder rigs.

The Follow Focus PRO has

a switchable lens gear

(1)

accommodate both long and short

lenses. It comes with one lens gear

belt

(2)

and has a wet erase type

China Wheel

(3)

so that you can get

repeatable, accurate focus pulls.

Adjusting and mounting the Follow

Focus PRO is easy. There is no need

to remove any other accessories.

Simply loosen the black thumb-screw

opposite the focus wheel

(4)

snap the follow focus onto your rig.

The Follow Focus PRO also features

adjustable A-B hard stops

protect your lens from overcranking.

(continued on reverse >)

and

(5)