Creating and Sending a Scenario
Scenario Name
Scenario Folder
Configure BGM
Background
Color
Image Quality
Tip :
Previously set content can be modified by "File" - "Properties".
This becomes the file name and scenario folder name of
the created scenario. This must be entered. Up to eight
capital letters and numbers can be entered. Keep this
item and the scenario folder directory in the next item to
within a maximum of 127 characters all told.
Specify where to create the scenario folder to be used
whilst creating the scenario. A scenario folder is created
in the directory specified here.
Click to select to play background music during scenario
playback. The audio file (WAVE format) selection
screen is displayed if this is selected. On this screen,
select the file to be used as the background music.
After selecting the audio file, play the file by clicking
the " " button on the right.
Stop playback by clicking the " " button.
Selects the background for graphic data in the scenario.
EMP SlideMaker2 changes each slide in a PowerPoint
file to a JPEG file and saves it. Use this item to select the
image quality to be used during conversion to JPEG
files.
A characteristic of JPEG files is that, when the
compression ratio is high, image quality is worse than
JPEG files of lower compression. However, highly
compressed files are smaller, and take less time to
project.
Using this setup item, the compression ratio grows
progressively higher going from "Highest image
quality" to "High Quality" and "Standard". Therefore,
when "Highest image quality" is selected, a high-quality,
large JPEG file is saved. When "Standard" is selected,
the image quality is lower than for the other settings, but
the JPEG file is smaller.
If a JPEG file is included directly into a scenario, any of
the above image quality settings will become invalid for
that image, and the compression ratio of the original file
is used.
6
EasyMP Operation Guide
Seite drucken