Cisco 8841 Handbuch - Seite 13

Your Phone

Procedure

Step 1

Make the QR code ready with one of these methods:

• Print the email with the QR code and hold the paper in front of the phone camera.

• Display the QR code on your mobile device and hold the device in front of the phone camera.

Step 2

Turn the ring around the camera clockwise to open the shutter.

Step 3

Scan the QR code.

When the scan succeeds, your phone registers with the server, and you're ready to make your first call.

Connect to Expressway

You can use Mobile and Remote Access Through Expressway to connect into your corporate network when

you are working away from your office. Because your phone does not have a TFTP address configured, the

phone displays a Welcome screen to begin the sign-in process.

Before you begin

If you have been using your phone at the office or with a VPN, reset your service mode before you connect

to Expressway.

If you need to connect to Mobile and Remote Access Through Expressway on-premise, restart your phone

and press Select when prompted.

Procedure

Step 1

Enter your activation code or service domain on the Welcome screen and press Continue.

Step 2

Enter your username and password.

Step 3

Press Submit.

Activate Your Phone Automatically with a QR Code

If your phone has a camera, you can scan a QR code to activate the phone. If you inadvertently press Enter

manually, press Back

Before you begin

You need the QR code from your welcome message.

If the code from your welcome message has expired, generate an activation code for your device with the Self

Care portal or request an activation code from your administrator.

Procedure

Step 1

Make the QR code ready with one of these methods:

to return to the QR code screen.

Connect to Expressway

Your Phone