Cisco 8851 Benutzerhandbuch - Seite 9

Procedure

Step 1 Press Applications

Step 2 Select Status > Product Information.

You can view the following information:

Product name - Model number of the Cisco IP Phone.

Serial number - Serial number of the Cisco IP Phone.

MAC address - Hardware address of the Cisco IP Phone.

Software version - Version number of the Cisco IP Phone firmware.

Hardware version - Version number of the Cisco IP Phone hardware.

Certificate - Status of the client certificate, which authenticates the Cisco IP Phone for use

in the ITSP

in the phone.

Customization - For an RC unit, this field indicates whether the unit has been customized or

not.

already retrieved its

state as Acquired.

Step 3 Press Exit to return to the Applications screen.

View the Network Status

Procedure

Step 1 Press Applications

Step 2 Select Status > Network Status.

You can view the following information:

• Network type - Indicates the type of Local Area Network (LAN) connection that the phone

uses.

• Network status - Indicates if the phone is connected to a network.

• IPv4 - IP address of the phone. You can see information on IP address, VLAN ID,

Addressing type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2

of the phone.

• IPv6 - IP address of the phone. You can see information on IP address, VLAN ID,

Addressing type, IP status, Subnet mask, Default router, Domain Name Server (DNS) 1, DNS 2

of the phone.

• MAC address - Unique Media Access Control (MAC) address of the phone.

• Host name - Displays the current host name assigned to the phone.

• Domain - Displays the network domain name of the phone. Default: cisco.com

• Switch port link - Status of the switch port.

• Switch port config - Indicates speed and duplex of the network port.

• PC port config - Indicates speed and duplex of the PC port.

• PC port link - Indicates speed and duplex of the PC port.

View the Phone Status

Procedure

Step 1 Press Applications

9 |

P a g e

network. This field indicates if the client certificate is properly installed

Pending indicates a new RC unit that is ready for provisioning. If the unit has

customized profile, this field displays the Customization

Cisco IP Phone 8800 Series User Guide