Cisco 8851 Handbuch - Seite 3

Cisco IP Phone Accessories

Note

Connect the Footstand

If your phone is placed on a table or desk, connect the footstand to the back of the phone.

Procedure

Step 1

Insert the connectors into the slots.

Step 2

Press the footstand until the connectors snap into place.

Step 3

Adjust the angle of the phone.

Secure the Phone with a Cable Lock

You can secure your phone with a laptop cable lock up to 20 mm wide.

Procedure

Step 1

Take the looped end of the cable lock and wrap it around the object to which you want to secure your phone.

Step 2

Pass the lock through the looped end of the cable.

Step 3

Unlock the cable lock.

Step 4

Press and hold the locking button to align the locking teeth.

Step 5

Insert the cable lock into the lock slot of your phone and release the locking button.

Step 6

Lock the cable lock.

1. If you connect your headset to the phone with the Y-cable (RJ-9 connector and AUX connector) , make

sure that you enable Electronic HookSwitch Control in the Audio Volume area from Voice > User tab

on the phone administration web page.

2. When you use the Electronic Hookswitch (EHS):

• The EHS connects to the Cisco IP Phone 8811, 8841, and 8845 with the auxiliary port.

• The EHS connects to the Cisco IP Phone 8851, 8861, and 8865 with the auxiliary port, the USB port,

or with Bluetooth.

Connect the Footstand

Cisco IP Phone Accessories