Cisco 8865 Handbuch - Seite 15

Blättern Sie online oder laden Sie pdf Handbuch für IP-Telefon Cisco 8865 herunter. Cisco 8865 44 Seiten. Multiplatform phones
Auch für Cisco 8865: Eigenschaften (16 seiten), Benutzerhandbuch (24 seiten), Benutzerhandbuch (28 seiten), Firmware Migration Master Manual (31 seiten), Benutzerhandbuch (30 seiten), Benutzerhandbuch (23 seiten), Handbuch (43 seiten), Handbuch (14 seiten), Installationshandbuch (39 seiten), Handbuch zur Rekonfiguration (2 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (13 seiten), Schnellstart-Handbuch (2 seiten), Benutzerhandbuch (8 seiten), Handbuch (48 seiten), Handbuch (11 seiten), Benutzerhandbuch (40 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten)

Your Phone

• You have updated your Cisco Unified Communications Manager (Unified CM) to a software version

• You wants a different phone model from their current model.

• Your phone requires repair or replacement.

Limitation: If the old phone has more lines or line buttons than the new phone, the new phone doesn't have

the extra lines or line buttons configured.

The phone reboots when the configuration is complete.

Before you begin

Your administrator needs to set up Cisco Unified Communications Manager to enable the phone migration.

You need a new phone that hasn't been connected to the network or previously configured.

Procedure

Step 1

Power off the old phone.

Step 2

Power on the new phone.

Step 3

If prompted, enter your activation code.

Step 4

Select Replace an existing phone.

Step 5

Enter the primary extension of the old phone.

Step 6

If the old phone had a PIN assigned, enter the PIN.

Step 7

Press Submit.

Step 8

If you have several devices, select the device to replace from the list and press Continue.

Protect Your Video Phone Camera

The camera on your video phone is fragile and could break during transportation of the phone.

Before you begin

You need one of these:

• Original phone box and the packing material

• Packaging material, such as foam or bubble wrap

Procedure

Step 1

If you have the original box:

a) Place the foam on the camera in such a way that the lens is well-protected.

b) Place the phone in its original box.

that doesn't support the phone model.

Protect Your Video Phone Camera

Your Phone