Cisco Cisco 7960 Benutzerhandbuch - Seite 7

Supported Features at the University of Wyoming

Call Waiting:

Call Forward:

Call Transfer:

Conference:

Gives you the ability to answer two calls at once.

1. Answer call #1, then the second call will present itself on the

display and the phone will beep once in your ear. If you choose to

Answer the second call, press the Answer Softkey, which answers

the second call and places the first caller on hold.

2. To toggle between the two callers use the Hold Softkey and the

Resume Softkey.

Allows you to manually forward all calls coming into your set. You can

forward to an IP phone or non-IP phone.

To Activate:

1. Press the CFwdAll Softkey

2. Dial the number to which you want to forward

all calls.

To Cancel:

1. Press the CFwdAll Softkey

Allows you to transfer a call to another on-campus telephone number. Calls

cannot be transferred off-campus.

To Activate:

1. With a call in progress, press the Trnsfer

Softkey.

2. Dial the number to which you are transferring

the call.

3. When you hear ringing, press the Trnsfer

again, or when the party answers, announce the

call and press Trnsfer.

4. Hang up to end your participation in the call.

Special Note: To abandon the transfer, press the End Call

Softkey which disconnects the transfer and places the original

caller on hold.

Allows you to set up a conference with nine other parties on or off campus.

To Activate:

1. With a call in progress, press the Confrn

Softkey. This opens a new line while placing

the other party(ies) on hold.

2. Place a call to another party.

3. When the call connects, press Confrn again to

add this party to the call.

4. Repeat the first three steps to add another

caller.

Special Note: To abandon the addition of a conferee, press the

End Call Softkey, which disconnects that leg of the

conference and places the other conferees on hold.