Cisco Cisco 7960 Referenzhandbuch - Seite 8

Seite drucken

BASIC CALL HANDLING

This section covers basic call-handling tasks such as placing, answering, and transferring calls. The features you use to perform

these tasks are standard and available on most phone systems.

PLACING A CALL

To place a call, pick up the handset and dial. Or use one of the other options outlined in the table below.

IF YOU WANT TO...

Dial on-hook (no dial tone)

Dial using the speakerphone

Redial the most recently dialed number

Speed dial a number

Place a call when another call is active

(using a new line)

Place a call when another call is active

(using the same line)

Dial from a call log

Dial from a corporate directory on the

phone

SNET: CISCO 7940/7960 REFERENCE GUIDE

THEN...

Enter a phone number and do one of the following actions to go off-hook:

• Lift the handset

• Press

Dial

• Press

(a line button)

Press

New Call

and enter a phone number. Or, you can press

Many of the actions that you can take to dial will automatically trigger speakerphone mode, if the handset is in its cradle and

These actions include pressing

Redial

Press Redial. By default, Redial uses your primary line. However, you can open a secondary line and then press Redial. To open a line,

press

Do one of the following:

• Press

(a speed-dial button) before or after going off-hook.

• Enter a speed dial index number (1-99 on the keypad) while on-hook and press AbbrDial.

Press

for the new line. Doing so automatically places the first call on hold.

Press Hold, next press

New

Call, then dial, re-dial, or speed dial a number. Or, continue to talk on the active call while preparing to dial from a

call log or corporate directory. (See the next two rows in this table for details.)

Choose

Missed

Calls,

Received

EditDial. If you want to dial from a call log while on an active call, scroll to a listing and press Dial. Then choose a softkey to handle the original call:

• Hold—Puts the first call on hold and dials the second.

• EndCall—Disconnects the first call and dials the second.

• Transf—Transfers the first party to the second. (Press

• Confrn—Creates a conference call with all parties. (Press

Choose

Corporate Directory

go off-hook. If you want to dial from a directory while on an active call, scroll to a listing and press Dial. Then choose a softkey to handle the

original call:

• Hold—Puts the first call on hold and dials the second.

• EndCall—Disconnects the first call and dials the second.

• Transf—Transfers the first party to the second. (Press

• Confrn—Creates a conference call with all parties. (Press

before or after dialing, re-dialing or speed dialing a number.

or a speed dial button.

Calls, or

Placed

Calls, then scroll to a listing and go off-hook. To add a prefix or other digits, press

Transf

twice.)

Confrn

twice.)

(name can vary). Use your keypad to enter letters, then press Search. To dial, scroll to a listing and

Transf

twice.)

Confrn

twice.)

REFERENCE

is not lit.

Back to Table of Contents